Operating instructions The STABILA LA-5PG is a green 5 point laser for a simple use of horizontal and vertical levelling and also for use in a plumb line function. This laser can measure 90° angles with great precision. It is self-levelling in the range ± 4,5°...
Suitable batteries can also be used. Checking the calibration The LA-5PG point laser is designed for use on construction sites and left our factory perfectly adjusted.. As with any precision instrument, however, its calibration must be regularly checked. The unit should be checked before starting any new tasks, particularly when the unit has been exposed to strong vibrations.
Page 9
4. Mark a point (C) on the far wall or transfer the level beam location to the floor. 5. Move the LA-5PG to point B and align the level beam to point C again. 6. Mark the location of the square beam (D) on the floor.
Two parallel wall surfaces at least 5m /16‘5“ apart are required for the horizontal check. 1. Place the LA-5PG on a smooth surface or on a tripod as close as possible to wall A and with the front side pointing towards the wall 2.
Need help?
Do you have a question about the LA-5PG and is the answer not in the manual?
Questions and answers