Advertisement
Thank you for purchasing this Phillps Hue product, we highly appreciate your
choice for the Philips brand and wish you lots of pleasure using your product.
Please go to www.philips-hue.com
to
learn more about HUE and how to use
It
This manual B contains definitions of all potentially applicable parameters &
specifications with icons, as per International norms and safety standards.
However not all of them may be applicable for the product you purchased
-
please refer to the icons In the Manual A, for the ones which are partlculary
appllcalble for this product
ATTENTION: Below you will find all the explanations with numeric reference to
the Icons respectively In front of these PART-B safety Instructions. Applicable
icons to your fixture are shown in PART-A safety instructions. 01)This product
should only be Installed indoors. 02)Only suitable for dry locations. 03)The
product Is suitable for outdoor usage. 04)This product is not suitable for
children under 14 years 0S)Mlnimum allowed bending is 20cm in diameter.
06)Suitable for under-cabinet mounting. This device complies with Part 15 of
the FCC Rules and with RSS of Industry Canada. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. This equipment has been
tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This device
generates, uses, and can radiate radio frequency energy and, If not Installed
and used in accordance with the instructions. may cause harmful interference
to radio communications. This Class B digital apparatus complies with
CAN ICES-005 (B) / NMB-005 (B).
This digital apparatus does not exceed the class B limits for radio-noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications. NOTICE:
Changes or modifications made to this device not expressly approved by
Signify North America (USA) and Signify Canada Ltd/Signify Canada Ltee.
(collectively
"Signify")
may void the U.S. FCC and Canadian authorization to
operate this device.
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a reSidential
installation.
This device generates, uses, and can radiate radio frequency energy and, If not
installed and used in accordance with the instructions, may cause harmful
Interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
Installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user Is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-
If applicable, connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-
Consult the dealer or an experienced radlo/telev1s1on technician for help
This plug will fit in a polarized outlet only one way. If the plug does not fit
fully In the outlet. reverse the plug. If It still doe not fit, contact a qualified
Advertisement
