3.0 Potentiometers Adjustment
There two potentiometers located on the PCB device to set the optimal sensitivity of the
detection and the audio.
PIR Sensitivity Adjustment
•
•
Audio Sensitivity Adjustment
•
•
•
8
Use the Potentiometer marked "PIR" to adjust the detection sensitivity between 15%
and 100% according to walk test in the protected area. (Factory setting to 57%).
Rotate the potentiometer clockwise to increase range, counter-clockwise to decrease
range.
Use the potentiometer "AUDIO" to adjust the audio sensitivity.
Rotate the potentiometer clockwise to increase sensitivity.
Rotate the potentiometer counter-clockwise to decrease sensitivity.