Unpacking the Appliance
Remove the fixing tape and protective
vinyl, packing material product and its filter
before use.
Removing filter vinyl and
packing material
1
Remove the product from the
packaging and remove the fixing
tape attached to the product.
2
Grab the cover and gently pull to
separate it from the appliances.
• The direction with the LG logo on
the product display is the front of
the product.
Display
Air inlet
(cover)
3
After separating the filter, remove its
protective vinyl.
• When removing the packaged
filter, separate it from the protective
vinyl.
14
4
Install the filter in the product.
• Make sure that the handle is facing
upward
Handle
5
Remove the packing material
inserted at the bottom of the product.
6
Insert the tabs at the bottom of the
cover into the slots in the base of the
appliance and close the cover.
CAUTION
• Be sure to remove the vinyl from the
filter before using the product.
• Pay attention to the direction of the filter
when installing the filter.
• Be sure to remove the cushioning
material before using the product.
EN