Firmware Update Procedure; Updating Via Usb - Marantz SR7010 Service Manual
Av surround receiver
Hide thumbs
Also See for SR7010:
- Owner's manual (377 pages) ,
- User manual (32 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
FIRMWARE UPDATE PROCEDURE
1. Updating via USB
The latest firmware can be downloaded to a USB memory for updates.
1.1. Connecting to the USB Memory
(1) Preparation
•
Use a memory that supports USB2.0.
•
USB format : Prepare a USB memory formatted in FAT16 or FAT32.
•
Do not run the USB memory through a hub.
•
Do not connect a computer to the USB port of this unit using a USB cable.
•
Do not use an extension cable when connecting the USB unit.
•
If a USB memory device cannot be updated, replace it with a different USB memory device and perform the update
again.
1.2. Unzipping the Downloaded File
Unzip the downloaded file on your computer.
SR7010
USB_SR7010_XXXXXXXXXXXX-XXXX.zip
The "firmwares" folder is created upon unzipping the file.
Copy that folder to USB flash drive.
The "firmwares" folder must be in the root directly of the USB flash drive (memory).
copy to USB flash drive
80
Advertisement
Table of Contents
