Connecting The Appliance To The Home Connect App - Bosch WAV32M40TH User Manual And Installation Instructions

en Home Connect
network information for the WLAN
home network (Wi-Fi) to your appli-
ance.
Requirement: The Home Connect
app is open and you have logged on.
Press and hold Remote Start
1.
at least 3 seconds.
a The display shows Aut.
Set the programme to position 2.
2.
a The display shows SAP.
Press Start / Reload / Pause
3.
flashes in the display.
a
a The appliance now sets up its own
Wi-Fi network with the name (SSID)
HomeConnect.
Call up the Wi-Fi settings on the
4.
mobile device.
Connect the mobile device to the
HomeConnect Wi-Fi network and
enter the password (key) Home-
Connect.
a Your mobile device now connects
to the appliance. The connection
process may take up to
60 seconds.
42
for
Open the Home Connect app on
.
5.
your mobile device and carry out
the steps in the app.
In the Home Connect app, enter
6.
the network name (SSID) and
password (key) for your home net-
work.
Carry out the steps in the
7.
Home Connect app to connect the
appliance.
a If the display shows con and
lights up permanently, the appli-
ance is connected to the home
network.
If the display shows Err, the appli-
8.
ance is not connected to the home
network.
Check whether your appliance is
‒
in range of your home network.
Reconnect the appliance to the
‒
WLAN home network (Wi-Fi)
with WPS function.
Connect your appliance to the
9.
Home Connect app → Page 42.
15.3 Connecting the appli-
ance to the Home Con-
nect app
Requirements
¡ The appliance is connected to the
WLAN home network (Wi-Fi).
¡ The Home Connect app is open
and you have logged on.