JBL VTX Series Rigging Manual page 49

Once the VT has been disconnected from the flown array of B18s, the next step is to attach the first cluster of A8s to the flown B18s.
Note that the first VTX A8 connected to a B18 subwoofer is always pinned to the 4° position. This allows the topmost A8 cabinet to be
parallel with the Array Frame.
STEPS:
• Raise the suspended cluster of VTX B18s cabinets and align the A8 cart of cabinets underneath the suspended cluster.
1
2 • Once the two clusters are aligned, carefully lower the suspended cluster until the front or rear attachment points are nearly
touching. Ensure that the attachment points are aligned and then lower the suspended cluster until the front or rear attach-
ment points come together.
• Lower the array and then insert the QRP's.
3
1
VTX A8 | Rigging Manual
2
49