JBL VTX Series Rigging Manual page 19

STEPS:
• Lower the next A8 cabinet on top of the first enclosure and make sure all four corners are aligned and the rigging arms are
1
engaged.
• Use the four Quick Release Pins (two on each side) and secure the A8 cabinet to the A8 below.
2
• Set the cabinet side angle to the 10-degree (STORAGE) position and make sure the red locking lever is in the locked position.
3
• Repeat this process until all 4 cabinets are set on the VTX A8 VT.
4
2
VTX A8 | Rigging Manual
3
19
1
4