9.4 - A TT ACH THE NEXT ST ACK
STEPS:
•
Raise the suspended cluster of VTX A8 cabinets and align the next cart of cabinets underneath the suspended cluster.
1
•
Once the two clusters are aligned, carefully lower the suspended cluster until the front attachment points are nearly touching.
2
Ensure that the attachment points are aligned and then lower the suspended cluster until the front attachment points come
together. Insert the two front QRP's.
CAUTION:
•
Always ensure each cabinet is pinned to the same angle on each side of the enclosure.
•
The topmost cabinet in each array should be pinned in accordance with the Array Frame and Extension Bar position-
ing instructions in section 9.6.
VTX A8 | Rigging Manual
38
2