Remove The Touch Pad With Cable - Lenovo Yoga Slim 7 Hardware Maintenance Manual

Hide thumbs Also See for Yoga Slim 7:
Table of Contents

Advertisement

"Remove the lower case" on page 30
"Remove the battery pack" on page 31
"Remove the solid-state drive (SSD) module" on page 32
"Remove the Wi-Fi card" on page 33
"Remove the thermal module (with fans)" on page 37
"Remove the I/O bracket" on page 40
"Remove the system board" on page 43
Note: Only some models come with the fingerprint board. For models without the fingerprint board, you only
need to follow the first step.
Step 1.
Remove the power button (with fingerprint board) .
Figure 29. Remove the power button (with fingerprint board)
Step 2.
Separate the fingerprint board cable from the power button.
Figure 30. Separate the fingerprint board cable from the power button
Go to
https://support.lenovo.com/partslookup
replacement parts:
Fingerprint board cable
Power button (with fingerprint board)

Remove the touch pad with cable

Make sure the following FRUs (or CRUs) have been removed.
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yoga creator 7

Table of Contents