Figure 6. Disconnect the cable of the solid-state drive board
Step 2.
Remove two screws to release the solid-state drive board with cable.
Figure 7. Remove the solid-state drive board with cable
Screw specifications
M2 x L2
Go to
https://support.lenovo.com/partslookup
replacement part:
solid-state drive board with cable
Remove the touch pad with cable
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
32
Lenovo IdeaPad S940 and Lenovo Yoga S940 Hardware Maintenance Manual
Number of screws
2
to look up the Lenovo part numbers of the following