Page 1
ASSEMBLY MANUAL BRUKSANVISNING NOTE: 50% TIGHTEN BEFORE FIXING ALL BOLTS VIKTIGT – LÄS MONTERINGSANVISNINGARNA NOGA INNAN DU BÖRJAR Please don’t remove the batch code sticker at back side of this product! Any feedback please take picture of this batch code for traceablity purpose Ta inte bort ettiketten med batchnummer som finns på...
Page 2
Attention! Please note that at rst all screws should be inserted slightly by hand! Turn 2-3 times so that the screw grips on its own and connects all elements loosely . The screws must only be driven in tightly when all elements are connected with each other in this way Otherwise the setup won´t be possible.
Page 3
Component Hardware 14 pcs Right Frame 1 pc Bolt M6x40mm 1 pc Bolt M6x30mm 54 pcs Right Back Frame 1 pc 40 pcs Right Seat Frame Bolt M6x25mm 1 pcs 4 pcs Washer M8x2 mm Side Frame 1 pc Washer M8x10 mm 1 pc Right Front Frame Bottom Frame...
Page 4
Component Hardware Left Frame 1 pc Sofa Leg 2 pcs 1 pc Seat Cushion 4 pcs Left Back Frame 4 pcs 1 pc Back Cushion Left Seat Frame Left Front Frame 1 pc Fabric 1 pc 1 pc Rain cover 1 pc Side Frame 1 pc...
Page 5
Component Component 2 pcs 1 pc Box Bottom Frame Table Small Side Frame 1 pc 1 pc Box Left Frame Table Top 1 pc 1 pc Inner Frame Box Right Frame 1 pc Allen key 1 pc Box Front Frame Box Behind Frame 1 pc Table Big Side Frame...
Page 6
STEP 1 Connect Right frame (A) & Right back frame (B) with Bolt (1) STEP 2 Connect part from STEP 1 & Right seat frame (C) with Bolt (1)
Page 7
STEP 3 Connect part from STEP 2 & Front frame (E) STEP 4 Connect part from STEP 3 & Side frame (D) with Bolt (2)
Page 8
STEP 5 Connect part from STEP 4 & Rain cover (11). Tie the ropes to the round holes STEP 6 Connect part from STEP 5 & Bottom frame (F) with Bolt (1)
Page 9
STEP 7 Connect part from STEP 6 & Sofa leg (6), (7) with Bolt (3) STEP 8 Put on Seat cushion (8) & Back Cushion (9) to complete right bench...
Page 10
STEP 9 Connect Left Back Frame (H) & Left Seat Frame (I) with Bolt (2) STEP 10 Connect part from STEP 9 & Left Frame (G) with Bolt (2)
Page 11
STEP 11 Connect part from STEP 10 & Side Frame (L) with Bolt (2) STEP 12 Connect part from STEP 11 & Left Front Frame (K) with Bolt (2)
Page 12
STEP 13 Connect part from STEP 12 & Inner Frame (V) with Bolt (2) STEP 14 Connect part from STEP 13 & Sofa Leg (6) with Bolt (3)
Page 13
STEP 15 Put on Seat Cushion (8) & Back Cushion (9) to complete left bench STEP 16 Connect Box Right Frame (P) & Box Front Frame (Q) with Bolt (2)
Page 14
STEP 17 Connect part from STEP 16 & Box Bottom Frame (N) with Bolt (2) STEP 18 Connect part from STEP 17 & Box Left Frame (O) with Bolt (2)
Page 15
STEP 19 Connect part from STEP 18 & Box Behind Frame (R) with Bolt (2) STEP 20 Connect part from STEP 19 & Sofa Leg (6) with Bolt (3)
Page 16
STEP 21 Connect part from STEP 20 & Box Cover Frame (M) with Bolt (2) & Washer M8 (4) STEP 22 Connect part from STEP 21, Gaslift & Washer M8 (5) with Bolt (2)
Page 17
STEP 23 Connect part from STEP 22 & Fabric (10) to complete cushion box. STEP 24 Connect Table Big Side Frame (S), Table Small Side Frame (T) & Table Top (U) with Bolt (2)
Page 18
STEP 25 Connect part from STEP 24, Table Big Side Frame (S) & Table Small Side Frame (T) with Bolt (2) STEP 26 Connect part from STEP 25 & Sofa Leg (6) with Bolt (3)
Page 19
STEP 27 Put on Table Glass (12) to complete table...
Need help?
Do you have a question about the Allarp 166-1-63 and is the answer not in the manual?
Questions and answers