Know Your Mixer; How To Use - Champion CHEV110 User Manual

Know your mixer

Speed selector
Turbo button
Power cord
Beaters

How to use

1. Before the first use, remove the accessories from the storage box, then clean the beaters
and whisk. Before assembling the mixer, be sure the power cord is unplugged from the
power outlet and the speed selector is on the OFF position.
2. Assemble proper attachments into mixer. Beaters are for mixing egg white or mixing other
liquid. Dough hooks are for kneading the dough.
3. Ensure that the unit is at the OFF setting, plug in the power source.
4. Set the speed selector to your desired speed. There are 5 speed settings to be selected to
be selected. When kneading yeast dough, suggesting to select the speed selector by
lower speed and then by higher speed to achieve the best results. The mixer will run at the
highest speed when pressing turbo button.
Warning: Do not stick knife, metal spoons, fork and so on into bowl when operating.
Note: The max operation time per time is 5 minutes. Minimum 20 minutes' rest time must
be maintained between two consecutive cycles.
5. When mixing is completed, turn the speed selector to OFF position, unplug the cord from
power outlet.
6. If necessary, you can scrape the excess food particles from the beaters by rubber or
wooden spatula.
7. Hold the beaters/whisk with one hand and press the "Eject" button firmly down with the
other hand, remove the beaters/whisk.
Caution: The "eject" button can be pressed down only when the speed selector is on the OFF
setting, and make sure the power cord is unplugged from the power outlet before
removing the accessories. When ejecting the accessories, it must be noted never
face the accessories to person, it may result in injury.
Eject button
Main body
Dough hooks
EN
2