General - Sony ICF-CD543RM Service Manual

ICF-CD543RM
AC power cord
TIMER
Push
CLOCK
D.S.T.
SUMMER T.
PRESET TUNING
SELECT PRESET
1 2 3 4
4
SECTION 2

GENERAL

Cord clamp
OFF
Turn
TIMER
indicator
TIMER
PUSH START/STOP
The preset 3, VOLUME + and
CD u buttons have a tactile dot.
VOLUME TUNE/TRACK
RADIO
ON/BAND
5
TIME SET
Magnet
The VOL + and u buttons have a
tactile dot.
Size AAA (R03) x 2
MEGA BASS
LOW
HIGH
OPEN/CLOSE
CD
PLAY MODE
OFF
This section is extracted from
instruction manual.
Features
• Built-in CD player with CD-R/RW playback
function
• Dynamic Bass Reflex Sound with the MEGA
BASS sound system
• TV/WEATHER/FM/AM 4 band PLL (phase
locked loop) synthesized clock radio (US
model)
• FM/AM 2 band PLL (phase locked loop)
(Canadian, AEP models)
• Easy Preset Digital Tuning with 25 station presets
• Easy to set dial cooking timer
• Remote Commander Included
• D.S.T. (Daylight Saving Time) – Summer time
calculation
Setting the Clock
(US model)
1
Plug in the CD kitchen clock radio.
The display will flash "AM 12:00".
2
Press CLOCK for a few seconds.
You will hear a beep and the hour will start
to flash in the display.
3
Press TUNE/TRACK•TIME SET + or –
until the correct hour appears in the
display.
4
Press CLOCK once.
The minute will flash.
5
Repeat steps 3 and 4 to set the minute.
After setting the minute, press CLOCK to start
the counting of the seconds, and you will
hear two short beeps.
To set the current time rapidly, hold down
TUNE/TRACK•TIME SET + or –.
The clock system varies depending on the model
you own.
12-hour system: "AM 12:00" = midnight
In step 5, when you press CLOCK after the
minute setting to activate the clock, the seconds
start counting from zero.
To change the display to the daylight saving
time (summer time) indication
Press D.S.T.•SUMMER T..
" " is displayed and the time indication
changes to summer time.
To deactivate the summer time function, press
D.S.T.•SUMMER T. again.
(Canadian, AEP model)
1
Plug in the CD kitchen clock radio.
The display will flash "AM 12:00" or "0:00".
2
Press CLOCK for a few seconds.
You will hear a beep and the hour will start
to flash in the display.
3
Press TUNE/TRACK•TIME SET + or –
until the correct hour appears in the
display.
4
Press CLOCK once.
The minute will flash.
5
Repeat steps 3 and 4 to set the minute.
After setting the minute, press CLOCK to start
the counting of the seconds, and you will
hear two short beeps.
To set the current time rapidly, hold down
TUNE/TRACK•TIME SET + or –.
The clock system varies depending on the model
you own.
12-hour system: "AM 12:00" = midnight
24-hour system: "0:00" = midnight
In step 5, when you press CLOCK after the
minute setting to activate the clock, the seconds
start counting from zero.
To change the display to the
daylight saving time (summer time) indication
Press D.S.T.•SUMMER T..
" " is displayed and the time indication
changes to summer time.
To deactivate the summer time function, press
D.S.T.•SUMMER T. again.