D - Operation Information - omake Omk.IND01.I15.1800.Z5F User Manual

D – OPERATION INFORMATION
3- General instructions
- Follow the steps below to open the induction cooker in compliance with CE safety
regulations:
•
In the first step, press the
•
In the second step, set the power (10-stage power level of each device: P1... P10)
using the control touch screen button.
•
In the third step, press the
this case, the device will be in operation for 2 hours. But if you want to operate in
time, the time can be set by pressing the
- Pots and pans placed on the induction cooker must have a magnetic base (Iron,
Cast iron, Stainless steel, Enameled materials).
- Circles on the surface show the base size of the pans. All pots and pans must have
a flat bottomed.
Stainless steel
teapot
430, 304, 201
- Do not leave metal spoons, ladles etc. in the pan during and after cooking. And
while cooking; be careful not to have accessories such as rings in your hands.
- Do not use aluminum-based stainless steel pans, glass pans, bronze pans, copper
pots, spider pans and ceramic pans.
- The minimum diameter of the pot must be greater than 6 cm.
touch screen buttons.
Iron Enameled
Materials
power on / off touch screen button for 3 seconds.
start / stop touch screen button for 3 seconds. In
touch screen button and using the
Stainless steel
430, 304, 201
31
Cast iron