Rungu Taillight Installation And Operation Instruction Manual
  1. Manuals
  2. Brands
  3. Rungu Manuals
  4. Bicycle Accessories
  5. Taillight
  6. Installation and operation instruction manual

Rungu Taillight Installation And Operation Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
V1.0
Rungu Taillight Installation and Operation
®
rungu
taillight
installation and operation
The Rungu taillight by GUB provides great visibility for Rungu riders on and off-road when riding at night.
The taillight has five different modes of operation, and using the appropriate mount, attaches to any
Rungu or Rungu Dualie. The taillight includes a sensor that detects braking causing the taillight to
illuminate more in the same manner as a brake light.
Copyright 2017 Standard Bearer Machines, LLC
Page 1 of 15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Taillight and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Rungu Taillight

Summary of Contents for Rungu Taillight

  • Page 1 The Rungu taillight by GUB provides great visibility for Rungu riders on and off-road when riding at night. The taillight has five different modes of operation, and using the appropriate mount, attaches to any Rungu or Rungu Dualie. The taillight includes a sensor that detects braking causing the taillight to illuminate more in the same manner as a brake light.

  • Page 2: Table Of Contents

    Installing the light to a seatpost (Rungu Juggernaut/Dualie Standard) ............3 Tools required ............................3 Installation ..............................3 Installing the light to a Rungu Cargo Rack – Single Battery Models (Rungu Dualie Steep/Rugged) ..... 5 Tools required ............................5 Installation ..............................5 Installing the light to a Rungu Cargo Rack –...

  • Page 3: Installing The Light To A Seatpost (Rungu Juggernaut/Dualie Standard)

    None Installation The taillight kit comes with the mounting strap and socket, taillight and charging cable. First strap the socket to the seat post as shown below. Make sure to orient the socket so that it points the tail light horizontally to the rear as shown below.
  • Page 4 V1.0 Rungu Taillight Installation and Operation Screw the taillight into the socket. Copyright 2017 Standard Bearer Machines, LLC Page 4 of 15...

  • Page 5: Installing The Light To A Rungu Cargo Rack - Single Battery Models (Rungu Dualie Steep/Rugged)

    5mm hex wrench Installation The taillight kit comes with the Cargo Rack mount with socket, two M6 screws and washers, taillight and charging cable as shown below. First, use the 5mm hex wrench to remove the two screws holding the Cargo Rack stiffener in place in the rear of the Cargo Rack.
  • Page 6 V1.0 Rungu Taillight Installation and Operation Align the mount with the screw holes as shown and use the 5mm hex wrench to install the first M6 screw and washer from the installation kit. Note that the socket side of the mount faces the rear of the cargo rack.
  • Page 7 V1.0 Rungu Taillight Installation and Operation Install the second screw into the slot and use the hex wrench to tighten the screw into the Cargo Rack. Tighten both screws. The installed mount should appear the same as below Copyright 2017 Standard Bearer Machines, LLC...
  • Page 8 V1.0 Rungu Taillight Installation and Operation Screw the taillight into the mount socket. Copyright 2017 Standard Bearer Machines, LLC Page 8 of 15...

  • Page 9: Installing The Light To A Rungu Cargo Rack - Dual Battery Models (Rungu Xr Models)

    Needlenose pliers Installation The taillight kit comes with the Cargo Rack Dual Battery mount with socket, two M6 screws, nuts and washers, taillight and charging cable as shown below. First, open the rear battery case; disconnect and remove the rear battery. Looking under the hinge of the battery case door you’ll see two hole-plugs.
  • Page 10 Rungu Taillight Installation and Operation From the back of the cargo rack, insert the taillight mount so that the two circular bosses align with the two unplugged holes. Install the first screw and washer from the inside of the battery case through the hole in one of the bosses.
  • Page 11 V1.0 Rungu Taillight Installation and Operation Use the 10mm socket wrench to secure the nut from the outside and stabilize the mount against the back of the cargo rack. While securing the screw with the hex wrench, tighten the nut using the socket wrench.
  • Page 12 V1.0 Rungu Taillight Installation and Operation Screw the taillight into the mount socket. Copyright 2017 Standard Bearer Machines, LLC Page 12 of 15...

  • Page 13: Charging The Taillight

    To recharge the taillight, unscrew the taillight from the mount. Install the charging cable into the back of the taillight. Connect the other end to a USB charger port as you would use for your cell phone. You can also charge it from the battery on Rungu Dualie integrated battery units, or from the port under the display on all Rungu Dualies (though the Rungu Dualie must be turned on for the port to work).
  • Page 14 V1.0 Rungu Taillight Installation and Operation Copyright 2017 Standard Bearer Machines, LLC Page 14 of 15...

  • Page 15: Operating The Taillight

    There are five different taillight settings and each one can sense braking to illuminate brighter just like a brake light in a car. Each time you press the button in the center of the taillight for one second after turning on the taillight changes the way the taillight operates. After the fifth press of the button, the taillight returns to the default mode.

Table of Contents