Table of Contents
Advertisement
3. Display instructions
Displayresolution: 640×480
No.
Description
1
Marking tool
2
Image mode
3
Swatches switch
4
Temperature measuring tool
5
Vitta tool
6
System setup
7
Lower limit of swatchesscale
4. Power on-off
Long press the "Power button" for 5 seconds to start up the thermal imaging device (if start up the
device just now, the device is not being used for a long time or after the measurement environment
changes, it will take up 30 minutes for starting up the device to measure the temperature). Long press
the "Power button" for 5 seconds to turn off the thermal imaging device. When the thermal imaging
device is in low power mode, the reminder of low power will pop up. At this time, the thermal imaging
device needs to be turned off to charge. When the thermal imaging device is in low power mode all the
time, the thermal imaging devicewill automatically be shut down.
No.
Description
8
Automatic tracking of the minimum point
9
Color temperature bar
10
Upper limit of swatchesscale
11
Electric quantity
12
Temperature of the measurement central
point
13
Automatic tracking of the maximum point
14
Temperature measurement central point
7
Professional Thermal Imager User Manual
Advertisement
Table of Contents
