13.11
Automatic Shutdown
After entering the first-level menu on the Setting page, select "Automatic Shutdown" option, and
select Off /5 /10 /20 /30 /45 /60 /90 by using"Up/Down key".
13.12
Factory reset
After entering the first-level menu on the Settings page, select the option of "Factory reset" option,
press "SET key", and the prompt "Shutdown and factory reset" will pop up. If you select Yes, the device
will automatically shut down, and the instrument will restore factory settings after manual startup.
13.13
Formatting
After entering the first-level menu on the Settings page, select the "Formatting" option and press
the "SET key". If there is SD card, the message "format SD card" will pop up? If you select Yes, will
format the SD card. If there is no SD card , the message "Unknown"will be displayed.
Professional Thermal Imager User Manual
17