3.
Place the tilt lock lever in the release po-
sition.
4.
Hold the rear of the top cowling with one
hand, tilt the engine up, and turn the tilt
support lever toward you or tilt support
knob into the clamp bracket, and then
place the tilt lock lever back into the lock
position to support the outboard motor.
EMU31760
Procedure for tilting up (power trim
and tilt models / power tilt models)
1.
Place the remote control lever / gear
shift lever in neutral.
ZMU04063
ZMU04064
2.
Disconnect the fuel line from the out-
board motor or close the fuel cock.
ZMU04065
3.
Press the power trim and tilt switch /
power tilt switch "
board motor has tilted up completely.
Operation
N
" (up) until the out-
ZMU03196
ZMU04066
38