Secure Your Powerline Network By Pairing - TP-Link PG1200 User Manual

Chapter 2
2 3

Secure Your Powerline Network by Pairing

All powerline adapters share some common factory settings, and can communicate
with one another. If you want your powerline adapters to communicate only with your
own powerline adapters, you should pair them. Thus a secured powerline network is
formed and other powerline adapters can no longer join your powerline network without
being paired.
Note: You can only pair two devices at a time.
I want to:
Secure my powerline network and prevent other powerline devices from being added
to my network.
For example, I've extended my network using the Plug & Play method. Now I want to
secure my network.
How can I do that?
1 Verify all powerline devices' Powerline LEDs are solid green.
Tips: We recommend that you plug in your powerline devices near each other, or as close to each
other as possible when pairing. Your settings will not be affected. The devices can be relocated to
where they are needed once pairing is complete.
2 Press the Pair button on one of the powerline devices for 1 second. Its Power LED
starts blinking.
3 Within two minutes, press the Pair button on another powerline adapter for 1 second.
Its Powerline LED starts blinking. When the Powerline LED turns solid green, the
pairing process is complete.
Blinking
Green
Done!
Enjoy your secure powerline network!
Blinking Green
within 2 minutes
Solid Green
Use Your Powerline Adapter
8