Table of Contents
Advertisement
H POSITION
H POSITION
V POSITION
V POSITION
CLOCK
CLOCK
NOTE: 1. Due to varying signal content, you may see vertical or horizontal lilnes bend occasionally in PC mode. However, this
phenomenon is not a defect. It s caused by a lack of picture content due to under-scanning in PC mode.
2. This set provides the best picture quality in SVGA mode. It is recommended that you set your PC to SVGA mode. In
OVERSCAN mode, top/bottom icon will be approximately 19% to 50% within the viewable area, and should be
accessible to grab and click. Picture is overscanned when receiving XGA or higher resolution.
This feature allows you to adjust the horizontal position of the display.
50
This feature allows you to adjust the vertical position in PC mode.
50
Adjusts the dot clock frequency to reduce the vertical stripe. Sampling clock of Mulit-Scan
Converter unit is changed when pressing CURSOR LEFT ( ) or CURSOR RIGHT ( ) buttons.
50
76
PC ON SCREEN DISPLAY
Use Left/Right cursors to adjust the horizontal position.
Press the MENU button to return to initial position of
menu icon and EXIT to quit.
Use Left/Right cursors to adjust the vertical position.
Press MENU button to return to initial position of
menu icon and EXIT to quit.
Use Left/Right cursors to adjust the clock. Press the
MENU button to return to initial position of menu icon
and EXIT to quit.
Advertisement
Table of Contents
