Hitachi 36SDX01S Operating Manual page 52

ADVANCED
Use ADVANCED SETTINGS to improve the sound performance of your PC ready color TV, depending
SETTINGS on listening conditions.
Press CURSOR or to highlight a function. Press CURSOR
the box, it is ON. Press EXIT to quit menu or CURSOR
MTS MODE
Multi-Channel Television Sound (MTS) will allow you to select STEREO (a Stereo Broadcast), MONO (Monaural Sound) used when
receiving a weak stereo broadcast or SAP (Second Audio Program) which may be a secondary language, weather report, etc.
The sources received will be displayed at the top center edge of the PC ready color TV. The source you select will be displayed
above the sources received. See example below for each selection when both stereo and second audio are received (monaural is
always received).
STEREO SELECTED
STEREO
ST/SA
INTERNAL SPEAKERS
This function is useful when first setting up the external speakers, or if you prefer to use only speakers from a separate stereo
system.
AUTO NOISE CANCEL
This function eliminates the noise in between stations. If a channel is tuned and is noisy, this function will automatically eliminate
the audio for that channel and set to blue screen.
LOUDNESS
This function will improve the quality of both low and high frequency sounds when listening at low volume levels.
31
NEWS
10:00 PM
FAV
CH
to change the function setting. When the function has an X in
to return to previous menu.
SAP SELECTED
31
SAP
NEWS
ST/SA
10:00 PM
52
FAV
CH
MONO SELECTED
10:00 PM
AUDIO
31
NEWS