Advertisement
EL60WMT Master Remote
The Master remote is for maintenance; it cannot open the lock. The
top button is the ADD menu, the bottom is DELETE.
You can also ADD or DELETE by disassembling the lock and using the manual
push button within the receiver.
How to Use the Master Remote
INOX™ EL60WR
Grade 1 Lockset with
Wireless R FID Remotes
Included in System:
An RFID (Radio‐Frequency
Identification) receiver with
cables for internal connections
Up to ten EL60‐WT User remotes
Up to three EL60‐WMT Master
remotes
A powerful magnetic system within the Receiver and the
Master Remote prevents unwanted interference with other
nearby locks. To initiate the system:
1. Place the EL60WMT on the lock under the keyboard;
the magnet will be detected and signaled by an audio
tone.
2. Press the ADD button for four (4) seconds; you'll hear
two audio tones and the ADD menu is activated.
3. Press the ADD button again to add the Master into the
memory of the RFID receiver (you'll hear three tones).
4. The receiver can add additional remotes (Master and
User) before timing out after 15 seconds.
Top: ADD
Bottom: DELETE
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for INOX EL60WR
Summary of Contents for INOX EL60WR
- Page 1 INOX™ EL60WR Grade 1 Lockset with Wireless R FID Remotes Included in System: An RFID (Radio‐Frequency Identification) receiver with cables for internal connections Up to ten EL60‐WT User remotes Up to three EL60‐WMT Master remotes Top: ADD Bottom: DELETE EL60WMT Master Remote The Master remote is for maintenance; it cannot open the lock. The top button is the ADD menu, the bottom is DELETE. You can also ADD or DELETE by disassembling the lock and using the manual push button within the receiver. How to Use the Master Remote A powerful magnetic system within the Receiver and the Master Remote prevents unwanted interference with other nearby locks. To initiate the system: ...
- Page 2 Adding other Remotes with the Master Remote When there’s at least one Master remote present in the lock’s memory, you can use that Master to add up to two other Master or up to ten EL60WT User remotes into the memory of the receiver. 1. Place a registered Master on the lock (see picture on page 1) until the audio tone sounds. 2. Press the ADD button for four seconds until you hear the audio tone (two beeps), which activates the Add menu. For the next 15 seconds, you can add up to two more Masters and up to ten User remotes by pressing a button on each remote. You’ll hear another audio tone when the time has expired. 3. If you try to add a remote that’s already registered, nothing will happen – you’ll receive no signal. If you try to add more remotes when the memory is full (too many remotes in the system), a three‐beep tone will signal the error. Deleting a User Remote 1. Place the Master remote on the lock until the audio tone sounds. 2. Press the DELETE button for four seconds; you’ll hear a double beep. 3. Press the button of the User remote within 15 seconds and it will be deleted. Delete All (Factory Default) 1. Place the Master remote on the lock until the audio tone sounds. 2. Press the DELETE button for four seconds; you’ll hear a double beep. 3. Press the DELETE button again to delete all remotes and return the lock to Factory Default. ...
Need help?
Do you have a question about the EL60WR and is the answer not in the manual?
Questions and answers