Removing Cartridge Group - ABB HT575645 Operation Manual

8.5
8.5
CAUTION
© Copyright 2017 ABB. All rights reserved.
Disassembly and assembly

Removing cartridge group

Removing cartridge group
Remove insulation.

Version with compressor wheel cooling system
Dismantle air supply line. (See also chapter entitled Preliminary re-

marks / Layout and functionality)
Disconnect oil pipes in accordance with enginebuilder's instructions.

Oil orifice plates
An orifice plate for adjusting the oil pressure is fitted in each of the two
oil inlet channels in the bearing casing. When the cartridge group, the
bearing casing or the turbocharger is fitted to the engine, it must be en-
sured that the orifice plates that are specified for the turbocharger have
been installed in the two oil inlet channels.
Check correct installation of oil orifice plates.

Operation Manual / TPL67-C.. - TPL71-C..
8
8.5 Page 96