Removing And Fitting Filter Silencer Or Air Suction Branch - ABB HT575645 Operation Manual

8.3
8.3
Removing the air suction
branch
Installing the air suction
branch
© Copyright 2017 ABB. All rights reserved.
Disassembly and assembly
Removing and fitting filter silencer or air
suction branch
Removing and fitting filter silencer or air suc-
tion branch
Disconnect all air lines in accordance with the engine builder's instruc-

tions.
Dismantle the insulation where necessary.

Pass a lifting gear around the air suction branch. It is permissible to

pass the lifting gear through holes possibly provided in the ribs to im-
prove stability.
Unscrew the nuts (72027) and remove them together with the washers

(72018).
Remove the air suction branch and set it down to one side.

Fit the air suction branch in reverse order.

Operation Manual / TPL67-C.. - TPL71-C..
8
8.3 Page 93