Stopping The Engine - ABB HT843855 Operation Manual

4.5
4.5
CAUTION
CAUTION
© Copyright 2016 ABB. All rights reserved.
Operation

Stopping the engine

Stopping the engine
Stopping the engine of oil-cooled turbocharger version
Heat in the turbocharger must be dissipated by the further circulating
lubricating oil.
Post-lubricate for 15 ... 20 minutes.

Maintain oil pressure of 0.5 ... 1.0 bar for post-lubrication.

Stopping the engine of water-cooled turbocharger version
Heat in the turbocharger must be dissipated.
Allow turbocharger cooling water to run for 15 ... 20 minutes after

stopping engine.
Allow oil lubrication to continue running until rotor comes to a stop.

Further post-lubrication is not required and not recommended.
Operation Manual / TPS48-D/E.. - TPS61-D/E..
4
4.5 Page 54