en Cookware test
Display
Setting
Set circulating-air mode or air extraction
mode.
Setting automatic start
Setting the sensor sensitivity for the ventila-
tion system.
Setting the run-on
If your hob is working in air extraction mode,
the ventilation system is switched on at the
power level for approx. 6 minutes.
If your hob is working in circulating-air mode,
the ventilation system is switched on at the
power level for approx. 30 minutes.
The run-on function automatically switches
off after this time.
Automatic cookware detection
Restoring factory settings
1
Factory setting
22.2 To go to the basic settings
Requirement: The hob must be switched off.
1.
To switch on the hob, touch
2.
Within the next 10 seconds, press and hold
seconds.
Product information
Directory for the technical after-sales
service (TK)
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. To call up the individual displays, touch the
control panel.
23 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the size of the cookware
base corresponds to the size of the cooking zone be-
ing used.
Access is via the basic settings. → Page 23
24
.
for 4
Display
.
.
Value
- Configure circulating-air mode.
- Configure air extraction mode.
- Switched off.
- Switched on: Automatic mode with sensor control.
- Switched on: The ventilation system starts at a power
level in accordance with the relevant power levels for the
cooking zones.
- Lowest sensor sensitivity setting.
- Medium sensor sensitivity setting.
- Highest sensor sensitivity setting.
- Switched off.
Switched on: Automatic function with sensor-controlled
run-on.
1
- Switched on
:
- Manually select the required cooking zone.
- The cooking zone detects the size and the position of
the cookware and selects the corresponding cooking
1
zone(s).
1
- Individual settings
.
- Factory settings.
3.
Touch
to access the basic settings.
and light up as a presetting.
a
4.
Touch
repeatedly until the desired setting ap-
pears.
5.
Select the required setting in the settings area.
6.
Touch and hold
a The settings are saved.
22.3 Discarding changes to the basic
settings
▶
Touch
.
a All changes are discarded and not saved.
23.1 Carrying out Cookware test
As a single cooking zone, the flexible cooking zone is
set in such a way that only the individual item of cook-
ware is checked.
1.
At room temperature, place the cookware with ap-
prox. 200 ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.
2.
Call up the basic settings and select .
1
1
for 4 seconds.
1