Service - Hitachi CP-S335 User's Manual And Operating Manual

OPTION Menu (continued)
Item
FILTER TIME

SERVICE

The filter time is the time counted after the last resetting. It is shown
in the OPTION menu as the use time of the air filter.
Pressing the RESET button on the remote control for about 3
seconds displays a dialog. To reset the filter time, select the RESET
using the button ▲.
RESET  CANCEL
• Please reset the filter time only when you have cleaned or
replaced the air filter, for correct messages about the air filter.
• About the caring the air filter, please see the section "Air filter" (
40).
Selecting this item displays the SERVICE menu.
Select an item using the buttons ▲/▼, and press the button ► or
the ENTER button on the remote control to progress.
FAN SPEED  FACTORY RESET  GHOST
FAN SPEED
Using the buttons ▲/▼ switches the rotation speed of the cooling
fans. The HIGH is the mode for use at highlands etc. Note that the
projector is noisier when the HIGH is selected.
HIGH  NORMAL
GHOST
1. Select a color element of ghost using the buttons ▲/▼ and press
the cursor button ► or the ENTER button on the remote control
to progress.
2. Adjust the selected element using the buttons ▲/▼ to disappear
ghost.
FACTORY RESET
Selecting RESET using the button ▲ performs this function. By this
function, all the items in all of menu will collectively return to the
initial setting. Note that the items LAMP TIME, FILTER TIME and
LANGUAGE are not reset.
RESET  CANCEL
Multifunctional settings
Description
37