Table of Contents
Advertisement
Chapter 3
Installing the Cisco XR 12410 Router
Step 2
Figure 3-10
Removing a Card from the Switch Fabric and Alarm Card Cage
Clock scheduler card
Air filter door
Step 3
Step 4
Rack-Mounting the Router Chassis
OL-17441-01
Starting at slot CSC0:
Pivot the ejector levers to unseat the card from the backplane connector
a.
(Figure
3-10).
Slide the card out of the slot and place it directly into an antistatic bag or other
b.
ESD-preventive container.
Repeat Step 2 for each card.
Close the air filter door and tighten the captive screws to prevent the door from
opening during the chassis installation.
The router chassis can be installed in either a front-mounted position or a
center-mounted position as shown in
Cisco XR 12410 and Cisco XR 12810 Router Installation Guide
Rack-Mounting the Router Chassis
Figure
3-11.
3-15
Advertisement
Table of Contents
Troubleshooting
