Setting Up; Arrangement - Hitachi CP-RX94 User Manual

Setting up

Install the projector according to the environment and manner the projector will be
used in.
For the case of installation in a special state such as ceiling mount, the specified
mounting accessories (Specifications in the User's Manual (concise)) and
service may be required. Before installing the projector, consult your dealer about
your installation.

Arrangement

Refer to tables T-1 and T-2 at the back of User's Manual (concise) as well as the
following to determine the screen size and projection distance.
The values shown in the table are calculated for a full size screen.
a Screen size (diagonal)
b Projection distance (±10%, from the projector's end)
c1 , c2 Screen height (±10%)
• If the projector is used at an altitude of about 1600 m (5250 feet) or higher,
set ALTITUDE of the SERVICE item in the OPTION menu to HIGH (54).
Otherwise, set it to NORMAL. If the projector is used with a wrong setting, it may
cause damage to the projector itself or the parts inside.
(continued on next page)
Setting up
7