Setting Up The Projector - Hitachi CP-S225JA User Manual

SETTING UP THE PROJECTOR

CAUTION • Install the projector in a suitable environment according to instructions
of the accompanying manual "SAFETY INSTRUCTIONS" and this manual.
• If you press the elevator buttons without holding the projector, the projector might
crash down, overturn, smash your fingers and possibly result in malfunction. To
prevent damaging the projector and injuring yourself, ALWAYS HOLD THE
PROJECTOR whenever using the elevator buttons to adjust the elevator feet.
Angle Adjustment
Use the foot adjusters on the bottom of the projector to adjust the projection
angle. It is variable within 0˚ to 10˚ approximately.
Lift up the front side of the
1
projector, and pressing the foot
adjuster button, adjust the
projection angle
Release the button to lock at the
2
desired angle
Make the rear foot adjuster screw to
3
adjust the left-right slope
6
Press the foot adjuster button
Rear Foot Adjuster