Connecting With Your Devices - Hitachi CP-A300N User Manual

Arrangement (continued)
NOTE
• The projector may make a rattling sound when tilted, moved or shaken,
since a fl ap to control the air fl ow inside of the projector has moved. Be aware that
this is not a failure or malfunction.

Connecting with your devices

Be sure to read the manuals for devices before connecting them to the projector.
Make sure that all the devices are suitable to be connected with this product, and
prepare the cables required to connect. Please refer to the following illustrations
to connect them.
For details, please see "User's Manual" - "Operating Guide" and "Network Guide".
(20, 22)
• When AUTO is selected for the COMPUTER IN1 or COMPUTER IN2 port in
COMPUTER IN of the INPUT menu, that port will accept component video signals.
• To use network functions of the projector, connect the LAN port with the
computer's LAN port, or with an access point that is connected to the computer
with wireless LAN, using a LAN cable.
VCR/DVD/Blu-ray
Disc player
• If you insert a USB storage device, such as a USB memory, into the USB TYPE A
port and select the port as the input source, you can view images stored in the device.
• You can connect a dynamic microphone to the MIC port with a 3.5 mm mini-plug.
In that case, the built-in speaker outputs the sound from the microphone, even
while the sound from the projector is output.
(continued on next page)
USB TYPE B
USB
TYPE A
DC5V
0.5A
MONITOR OUT
CONTROL
Access
point
COMPUTER IN2
HDMI
MIC AUDIO IN1 AUDIO IN3 AUDIO OUT
AUDIO IN2
6
Computer
COMPUTER IN1
S-VIDEO
VIDEO