Table of Contents
Advertisement
PLAYING A DISC
On-Screen Information
You can check the MP3 files during playback.
1
Press DISPLAY.
• The name of the file currently in play will be displayed.
2
Press DISPLAY again to show the track number,
the elapsed time, the repeat status, and the play-
back status at the top of the screen.
•
will be displayed when the repeat play has been
selected.
T - indicates Track repeat
G - indicates Group (folder) repeat
A - indicates All (disc) repeat
3
Press DISPLAY again to exit.
Program (MP3)
This feature allows you to program an MP3 disc to play in a
desired sequence.
1
In stop mode, press MODE.
• The PROGRAM screen will appear.
2
Press K or L to select a track, then press ENTER,
to save it in a program.
• Press CLEAR to erase the incorrect input.
3
Press PLAY to start programmed playback.
NOTE:
• To erase all programs at once, select ALL CLEAR and
press ENTER at step
Random Playback (MP3)
1
Press MODE twice while playback is stopped.
2
Press PLAY to play the tracks in random order.
Audio Language
The DVD player allows you to select a specific language dur-
ing DVD disc playback when multiple languages are avail-
able.
1
Press AUDIO during playback.
2
Press AUDIO repeatedly to select your desired
language.
Stereo Sound Mode
1
Press AUDIO repeatedly during playback to select
between STEREO, L-CH or R-CH.
STEREO - both right and left channels are active (stereo)
L-CH - only left channel is active
R-CH - only right channel is active
NOTE:
• If the Virtual Surround setting is ON, the sound mode will
be fixed to STEREO, and can not be changed.
MP3
MP3
2
.
MP3
DVD
Subtitle Language
The DVD player allows you to select a language for subtitle
during DVD disc (if available) playback.
1
Press SUBTITLE during playback.
2
Press SUBTITLE repeatedly to select your desired
subtitle language.
• The selected language will be displayed on the display
bar at the top of the screen.
3
To turn off subtitles, press { or B until OFF
appears.
NOTES:
• If your language is not shown after pressing AUDIO or
SUBTITLE several times, the disc may not have that lan-
guage. However, some discs allow you to change audio
language or subtitle language setting in the disc menu.
(Operation varies depending on the disc, so refer to the
manual included in the disc.)
• If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change
the Subtitle language setting. If you choose any other
languages, '---' will be displayed instead. (Refer to page
15.)
Camera Angle
Some DVD discs contain scenes which have been shot simulta-
neously from various angles. You can change the camera angle
when the (
) mark appears on the screen. If the "ANGLE
MARK" setting is "OFF" in the Display setting, the (
appear. (Refer to page 15.)
1
Press ANGLE during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2
Press ANGLE repeatedly to select your desired angle.
Changing the On-Screen Display
You can check information available on the current disc by
pressing DISPLAY on the remote control.
1
Press DISPLAY during playback to show current
chapter.
• The elapsed and remaining
playing time of the current
chapter will be displayed.
2
Press DISPLAY again to show current title.
• The elapsed and remaining playing time of the current
title will be displayed.
3
Press DISPLAY for the third time.
CD
• The BIT RATE and the current repeat setting will be
displayed.
• If you are playing a dual layered disc, the layer number
will also be displayed ( L0: Layer 0 is playing. L1: Layer
1 is playing).
4
Press DISPLAY for the fourth time to remove the
display.
– 13 –
DVD
DVD
) icon will not
DVD
9/49
0:03:21 -0:02:15
EN
Advertisement
Table of Contents
