Table of Contents
Advertisement
Installation & User Guide
QGateway Positioning
The QGateway relies on solar panels to charge the onboard batteries. To ensure adequate power, during
installation, the QGateway must be oriented to maximize solar collection.
1) Using a physical compass or cell phone compass app, identify south (for installations north of the
equator)
2) Install the QGateway on the magnetic surface:
a. Securely grab the QGateway with (2) hands on the sides.
b. Gently roll the QGateway onto the magnetic surface (See Figure 13-Figure 16).
WARNING: DO NOT attach the QGateway to a magnetic surface by placing the magnets straight onto
the surface! The rolling method described above is required. The cumulative magnetic force of the
mount is ~165lbs (75 kg). Failing to properly roll on the mount as described can result in personal injury
or damage to the QGateway.
WARNING: DO NOT detach the QGateway from a magnetic surface by pulling straight up from the
mounting surface! The rolling method described above is required. The cumulative magnetic force of
the mount is ~165lbs (75 kg). Failing to properly roll off the mount as described can result in personal
injury or damage to the QGateway.
3) Ensure the QGateway unit's solar panel faces south. See Figure 13
a. If the unit needs to be repositioned, gently "roll" the magnets off the surface to release
connection (Figure 14 - Figure 16)
4) Verify cellular tower direction (see Site Preparation: Cell Coverage Evaluation for cellular tower
identification) and ensure that the cellular antenna is not pointing directly at the cellular tower. This
scenario only occurs in a situation where the cellular tower is located directly north or south from the
QGateway. This will require a reevaluation of the QGateway positioning to allow for maximized solar
collection and cellular range. Consult Qualitrol if assistance is needed.
Figure 13: QGateway solar panel orientation towards due South
Advertisement
Table of Contents
