Body Fat Analysis Mode - HighGear BodyFat User Manual

OPERATING THE VIA BODYFAT
ANALYZER
In BODY FAT ANALYSIS MODE:
1. Press the START key on the bottom of the
pedometer unit.
2. Touch the sensors on the face of the pedometer
unit with your thumbs (press firmly for best
results).
������
3. Upper line will display a sequence of four O's
followed by PERCENTAGE OF BODY FAT.
Lower line will display GENERAL BODY TYPE
as a determination of body fat percentage (see
chart pg. 19). If sensors can not get a proper
reading, ERR will display in the upper line.
Please try measurement again.
NOTE: To ensure proper contact, it is recom- T To ensure proper contact, it is recom-
mended that fingers be slightly moistened with
perspiration or saliva.
8
�����
����� �����
�����
������