Safety Precautions And Working Techniques - Stihl FR 350 Instruction Manual

Safety Precautions and
Working Techniques
Special safety
precautions must be
observed when working
with this power tool
because of the very high
speed of the cutting tool.
It is important that you
read and understand the
instruction manual before
using your power tool for
the first time. Keep it in a
safe place for later
reference. Non-observance of the
following safety precautions may cause
serious or even fatal injury.
Always observe local safety regulations,
standards and ordinances.
If you have not used this type of power
tool before:
Have your dealer or other experienced
user show you how to operate your
power tool or attend a special course of
training in power tool operation.
FR 350, FR 450, FR 480
Minors should never be allowed to use a
trimmer.
Bystanders, especially children, and
animals should not be allowed in the
area where a trimmer is in use.
When the machine is not in use (work
break), shut it off so that it does not
endanger others and secure it against
unauthorized use.
The operator is responsible for avoiding
injury to third parties and damage to
their property.
Do not lend or rent your power tool
without the instruction manual. Be sure
that anyone using your power tool reads
and understands the information
contained in this manual.
You must be fit to work with a power tool.
Rested, healthy and in good physical
and mental condition
If you have any condition that might be
aggravated by strenuous work, check
with your doctor before operating a
power tool.
Persons with pacemakers only: The
ignition system of your unit produces an
electromagnetic field of a very low
intensity. This field may interfere with
some pacemakers. To reduce health
risks of serious, STIHL recommends
that persons with pacemaker consult
their physician and the pacemaker
manufacturer before operating this tool.
Do not operate this power tool while
under the influence of any substance
(drugs, alcohol) which might impair
vision, dexterity or judgment.
Depending on the cutting tool fitted, use
your power tool only for cutting grass,
wild growth, shrubs, scrub, bushes,
small trees and similar materials.
Do not use your power tool for any other
purpose since it may result in accidents
or damage to the machine. Never
attempt to modify your power tool in any
way since this may also result in
accidents or damage to the machine.
English
3