Siemens EX9 KX Series Information For Use page 13

10 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
¡ countUp function
10.1 Switch-off timer
You can use this function to programme a cooking
time for one or more cooking zones. The cooking zone
is automatically switched off once the time that is set
has elapsed.
Switching on Switch-off timer
1. Select the cooking zone and the power level.
2.
Touch ​ ⁠ in the settings area.
3. Set the cooking time in the settings area.
4. Touch ​ ⁠ to confirm.
a The cooking time begins to elapse.
a Once the cooking time has elapsed, the cooking
zone is switched off and a signal sounds.
Note: When you set a cooking time for a cooking zone
in which the fryingSensor is activated, the cooking time
will not start counting down until the selected temperat-
ure level has been reached.
Changing or switching off Switch-off timer
1. Select the cooking zone and touch
2.
Change the cooking time in the programming area
or touch ​ ⁠ to delete the time.
3. Touch ​ ⁠ to confirm the selected setting.
4.
Touch the cooking zone display to return to the
main screen.
10.2 Timer
You can use this function to switch on a timer. This
function operates independently of the cooking zones
and other settings. It does not automatically switch off
the cooking zones.
Switching on Timer
1. Touch ​ ⁠ .
11 powerBoost
This function allows large volumes of water to be
heated up even more quickly than with power setting 9.
This function is available for all cooking zones,
provided the other cooking zone in the same group is
not in use.
2.
3.
a The time starts to elapse.
a A signal tone sounds once the time has elapsed.
4.
a The displays go out and the signal tone stops.
Changing or switching off the Timer
1.
2.
3.
4.
10.3 countUp function
The stopwatch function displays the time that has
elapsed since activation.
Switching on countUp function
▶
a The time starts to elapse.
Pause countUp function.
1.
2.
a The stopwatch stops.
​ ⁠ . 3.
a The stopwatch continues to run.
Switching off countUp function
1.
2.
3.
11.1 Switching on powerBoost
1.
2.
a
3.
a The function is switched on.
11.2 Switching off powerBoost
1.
2.
a The function is switched off.
Note: In certain circumstances, the function is automat-
ically switched off to protect the electronic components
inside the PCB.
Select the required time in the programming area.
Touch ​ ⁠ to confirm the setting.
Touch ​ ⁠ .
Touch ​ ⁠ .
Change the time in the programming area or touch
​ ⁠ to delete the time.
Touch ​ ⁠ to confirm the selected setting.
To return to the main view, touch
Touch ​ ⁠ .
Touch ​ ⁠ in the main view.
Touch ​ ⁠ .
Touch ​ ⁠ .
Touch ​ ⁠ .
Touch ​ ⁠ . The time display is set to 00 m 00 s.
To switch the time display on again, touch
To return to the main view, touch
Select the cooking zone.
Select boost in the settings area.
​ ⁠ and ​ ⁠ light up.
Touch ​ ⁠ .
Select the cooking zone.
Set a different power level in the settings area.
Time-setting options en
​ ⁠ .
​ ⁠ .
​ ⁠ .
13