Table of Contents
Advertisement
q
w
e
4
q
w
4
r
q
r
t
y
e
w
e
(A)
(B)
Lingerie Stitch
q Stitch pattern:
w Thread tension dial: 2 to 8
e Presser foot:
Sew a fine seam in lingerie and lightweight knits. The
small seam size stretches and is comfortable to wear.
Place fabric edges so needle just clears edge when it
swings off the fabric to the right.
Applique
q Stitch pattern:
w Thread tension dial:
e Presser foot:
r Presser foot pressure dial:
* The stitch patterns 23, 25-26 can also be used.
Place an applique on the fabric and baste or pin it in place.
Lower the needle at the outer edge of the applique.
Sew while guiding the fabric so the needle falls along the
outer edge of the applique.
q Applique
w Outer edge
When turning a sharp corner, stop the machine with the
needle at the outer edge of the applique.
Raise the foot and pivot the fabric around the needle to
change the sewing direction.
• Adjusting the stitch width
Select pattern 24.
Press the "–" sign on the stitch width adjusting key e to
decrease the stitch width t.
Press the "+" sign on the stitch width adjusting key e to
increase the stitch width y.
e Stitch width adjusting key
The stitch width will be varied based on the right needle
drop position r.
(A) The stitch patterns 23 and 26 have a fixed center
needle drop position. The stitch width changes
symmetrically.
(B) The stitch patterns 24 and 25 have a fixed right needle
drop position. When you change the stitch width, the left
needle drop position will change.
48
11
Satin stitch foot F
24
1 to 4
Satin stitch foot F
1 to 3
Advertisement
Table of Contents
