Leupold RX-1400i TBR/W Complete Operating Instructions page 19

484 yards, and the upper display indicates
that you should hold 2 .9 MIL above your
intended point of impact . Holdover values
will be displayed in MIL for both yards and
meters modes .
MOA will show the minute-of-angle
adjustment for your target, which is based
upon the ballistics group and sight-in
distance you will choose in a later mode . The lower display
shows the line of sight distance to the target . The upper display
shows the appropriate number of MOA
to adjust over or under your target . In
the example to the right, the line of sight
distance is 517 yards, and the upper
display indicates that you should dial the
scope up 10 .25 MOA to account for bullet
drop . Scope corrections will be displayed
in MOA for both yards and meters modes .
TRIG, a function that is included to
support tradesmen and sportsmen alike,
displays the true horizontal range and true vertical range,
which is based upon trigonometry using angle and line of sight
distance . Line of sight distance (LOS) readings will be displayed
17