Table of Contents
Advertisement
56
EN
Remote sensor
Zoom Buttons
SHIFT
Left Button
Right Button
Normal playback
USING THE REMOTE CONTROL UNIT
Up Button
Down
Button
PLAY
PAUSE
STOP
RM-V716U
(provided)
Press T
To move image,
press
(Right)
while keeping
SHIFT held down.
Playback Zoom
To magnify the recorded image up to 10X at any time
during playback.
NOTES:
● Use the RM-V716U remote control unit to perform this
procedure.
● Make sure that the TBC mode is activated (
1
Press PLAY to find the scene of interest.
2
Press the Zoom Buttons (T/W) on the remote control.
Make sure the remote control is pointed at the
camcorder's remote sensor. Pressing T zooms in.
To move the image on screen around to find a particular
portion of the picture . . .
.... while holding down SHIFT, press
(Up) and
(Down).
To End Zoom . . .
.... press and hold W until magnification returns to
normal. Or, press STOP and then press PLAY.
NOTES:
● Zoom can also be used during still playback.
● Due to digital image processing, the quality of the image
may suffer.
● After zooming in on a still video image, when normal
playback is started, the zoomed-in effect is momentarily
cancelled but then resumes, returning magnification to
the previously set level.
(cont.)
pg. 36).
(Left),
(Right),
Advertisement
Table of Contents
