Using Menus For Detailed Adjustment; For Recording Menu - JVC GR-DX300 Instructions Manual

For Recording Menu

This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of the
more detailed camcorder settings (
1
Set the Power Switch
down the Lock Button
the LCD monitor fully or pull out the viewfinder fully.
2
4
Press MENU . The Menu Screen appears.
3
5
Press + or – to select the desired function menu,
and press SELECT/SET
4
Function menu setting depends on the function.
If you have selected "
" PROGRAM AE", "
" W. BALANCE" . . .
..... see the column on the right.
If you have selected "
" SYSTEM", "
" DSC" . . .
..... go to step 5.
5
5
Press + or – to select the desired function and
press SELECT/SET
5
press + or – to select the parameter, and press
3
SELECT/SET . Selection is complete.
6
5
Press + or – to select "
3
SELECT/SET twice. The Menu Screen closes.
• The icon represents "END".
NOTE:
When the Menu Screen is left on for a couple of minutes, a
residual image may be left on the screen and it may take
several seconds for the residual image to disappear. This is
not due to any defect of the unit.
EN
32

USING MENUS FOR DETAILED ADJUSTMENT

pg. 32 – 35).
@
to " " while pressing
$
located on the switch. Open
3
.
WIPE/FADER",
EXPOSURE" or
CAMERA", "
CAMERA DISPLAY" or
3
. The Sub Menu appears. Then,
RETURN" and press
Refer to "Fade/Wipe Effects" (
Refer to "Programme AE With Special Effects"
( pg. 27).
Refer to "Exposure Control" and "Iris Lock" (
31).
Refer to "White Balance Adjustment" and "Manual
White Balance Operation" (
Settings made in the "
MANUAL",
effective whether the Power Switch
" ". However, the menu settings can be changed only
when the Power Switch
REC MODE
Allows you to set the tape recording mode ([SP] or
LP) depending on your preference (
SOUND MODE
[12bit]: Enables tape recording of stereo sound on
four separate channels, and is recommended for use
when performing audio dubbing. (Equivalent to the
32 kHz mode of previous models)
16bit: Enables tape recording of stereo sound on two
separate channels. (Equivalent to the 48 kHz mode of
previous models)
ZOOM
10X*/16X**: When set to "10X*/16X**" while using
digital zoom, the zoom magnification will reset to
10X*/16X** since digital zoom will be disengaged.
[40X]: Allows you to use the Digital Zoom. By digitally
processing and magnifying images, zooming is
possible from 10X*/16X** (the optical zoom limit), to a
maximum of 40X digital magnification.
500X*/700X**: Allows you to use the Digital Zoom. By
digitally processing and magnifying images, zooming
is possible from 10X*/16X** (the optical zoom limit),
to a maximum of 500X*/700X** digital magnification.
* GR-DX300/DX100 only.
** GR-DX95/DX75 only.
[ ] = Factory-preset
WIPE/FADER
pg. 28).
PROGRAM AE
EXPOSURE
W.BALANCE
pg. 31).
CAMERA
CAMERA" Menu remain
@
is set to "
@
is set to " ".
C A M ERA
R EC MODE –
S OUND MODE – 12b i t
Z OOM – 40X
S NAP MODE – FUL L
G A I N UP – AGC
N AV I GAT I ON – MANUAL
RETURN
pg. 10).
pg. 30,
" or