Table of Contents
Advertisement
Round button
RST
Indication Panel
LED
Mark
System
SYS
Ethernet
WAN /LAN
Website : www.baudcom.com.cn
Press button quickly to form a network with other mesh
devices.
Press
button over 10 seconds to restore router to factory
RST
default.
Figure 1-5-2: Indication panel
Status
Off
The device is not running.
Green: WAN connected or mesh connected.
On
Orange: The device is on slave route mode.
Red: The device is starting.
Green: Mesh is not connected or connecting.
Blink
Orange: WAN is connecting.
On
Port is connected properly.
Off
Port connection exception or not connected.
Blink
Port is sending or/and receiving data.
Tel: +86 21 37709251
2LAN+WiFi MESH Router USER MANUAL
Description
Email: info@baudcom.com.cn
Page 4
Advertisement
Table of Contents
