Table of Contents
Advertisement
1. Q: All indicators are not lit?
A: (1) Power is off or power adapter is bad.
(2) Indicator LED switch is turned off.
2. Q: LAN indicators are not lit?
A: (1) Indicator LED switch is turned off.
(2) The cable breaks down or connection loosened.
(3) The cable type incorrect or too long.
3. Q: PC can't visit web UI?
A: (1) PC and HGU are not in the same network fragment. By default, LAN IP is
192.168.1.254/24.
(2) The cable breaks down.
(3) IP conflict or have loopback.
4. Q: User can't surf the Internet normally.
A: (1) PC has set a wrong IP and gateway or network is bad.
(2) There is loopback or attack in network.
(3) Route mode WAN connection doesn't get an IP or DNS is disabled.
5. Q: Unsuccessful MESH, Slave Router indicators always blinking.
A: (1) 'Easy MESH' function is not turned on
(2) Slave Router had MESH before, factory reset Slave router and reconfigure
6. Q: HGU stops to work after working for some time.
A: (1) Power supply is not working properly.
(2) The device overheats.
Website : www.baudcom.com.cn
2LAN+WiFi MESH Router USER MANUAL
Tel: +86 21 37709251
Email: info@baudcom.com.cn
Chapter 5 FAQ
Page 25
Advertisement
Table of Contents
