Table of Contents
Advertisement
After finishing the basic connection configuration, you can use its basic function. In order to
satisfy individuation service requirements, this chapter provides you parameter modification and
individuation configuration description.
3.1 Login
The device is configured by the web interface. The following steps will enable you to login:
1. Conform "2.2 Quick Installation" to install;
2.The device default IP is 192.168.1.254;
3.Open web browser, type the device IP in address bar;
4.Entry of the username and password will be prompted. Enter the default login User Name
and Password:
The default login User Name of administrator is "admin", and the default login Password is
"system".
3.2 Status
This part shows the main information of product.
3.2.1 Device Info
This page shows the device basic information, such as device model, device MAC, hardware
version, and firmware version and so on.
Website : www.baudcom.com.cn
2LAN+WiFi MESH Router USER MANUAL
Chapter 3 Configuration
Figure 3-1-1: Login
Tel: +86 21 37709251
Email: info@baudcom.com.cn
Page 7
Advertisement
Table of Contents
