Charging The Pmp - Hi-Tech HE-ZM883R User Manual

HE-ZM883R User Manual
6. CHARGING PMP:
I) Battery Status:
NOTE: If the PMP can't be turned on, it could be because the built-in battery is not charged, please
charge the battery first.
II) Charging Battery:
Insert AC charger into an electric outlet, then insert the round output terminal of the charger into the
charging port of this PMP (1). When the PMP is charging, the charging indicator LED (6) will become red;
when battery is fully charged, the LED will turn-off. When charging for the first time, it may take up to 6
PAGE: 12