Charging The Pmp - Hi-Tech HE-MP883G User Manual

HE-MP883G User Manual
11. ⇒ Built-in speaker
12. SD CARD⇒External card slot
13. RESET⇒ position recovery button
/AV OUT ⇒ Earphone input jack, audio/video output port
14.
15. AV IN、LINE IN ⇒ Audio/Video recording port
16. ⇒ Navigation buttons ("◄", "►", "▲" and "▼")
17. ⇒ Wrist strap buckle
18. ⇒ Built-in Microphone (MIC)
19. ⇒ Charge LED (Red)
20. POWER ⇒ Power ON/OFF button
21. ⇒ 3.0" true color LCD screen

6. CHARGING THE PMP:

I) Battery Status:
NOTE: If the PMP can't be turned on, it could be because the built-in battery is not charged,
please charge the battery first.
II) Charging Battery:
Insert AC charger into an electric outlet, then insert the round output terminal of the charger
into the charging port of this PMP (1). When the PMP is charging, the charging indicator LED
(6) will become red; when battery is fully charged, the LED will turn-off. When charging for the
first time, it may take up to 6 hours to fully charge the PMP.
Important:
• Only use the provided AC Charger to charge this PMP. The charger is for indoor use
only. Remove the charger from electric outlet when not in use. Don't try to repair,
disassemble or modify the charger.
• If you don't use the PMP for a long time, please fully charge it every 2-3 months.
• PMP can be charged with both Power ON or OFF. But it's strongly recommended to
charge the PMP with Power OFF.
Please visit us online at www.hittusa.com to check if an updated manual is available Page 4