Table of Contents
Advertisement
AV-29RF6
Measuring
Item
instrument
Adjustment
Remote
of
control unit
SUB BRIGHT
Adjustment
Remote
of
control unit
SUB
CONTRAST
Adjustment
Remote
of SUB
control unit
COLOURⅠ Ⅰ Ⅰ Ⅰ
22
Test point
Adjustment part
3.BRIGHT
4.CONT.
5.COLOUR
PAL COLOUR
SECAM COLOUR
NTSC 3.58 COLOUR
NTSC 4.43 COLOUR
No. 51754
Description
1. Receive any broadcast.
2. Select 2.V/C from the SERVICE MENU.
3. Select 3.BRIGHT with the MENU UP/DOWN key.
4. Set the initial setting value with the MENU LEFT/RIGHT key.
5. If the brightness is not the best with the initial setting value,
make fine adjustment until you get the best brightness.
6. Press the OK key and memorize the set value.
1. Receive any broadcast.
2. Select 2.V/C from the SERVICE MENU.
3. Select 4.CONT with the MENU UP/DOWN key.
4. Set the initial setting value with the MENU LEFT/RIGHT key.
5. If the contrast is not the best with the initial setting value, make
fine adjustment until you get the best contrast.
6. Press the OK key and memorize the set value.
[Adjustment method without measuring instrument]
1. Receive the PAL broadcast.
2. Select 2.V/C from the SERVICE MENU.
3. Select 5.COLOUR with the MENU UP/DOWN key.
4. Set the initial setting value for PAL COLOUR with the MENU
LEFT/RIGHT key.
5. If the colour is not the best with the initial set value, make
fine adjustment until you get the best colour.
6. Press the OK key and memorize the set value.
1. Receive the SECAM broadcast.
2. Select 2.V/C from the SERVICE MENU.
3. Select 5.COLOUR with the MENU UP/DOWN key.
4. Set the initial setting value for SECAM COLOUR with the MENU
LEFT/RIGHT key.
5. If the colour is not the best with the initial set value, make
fine adjustment until you get the best colour.
6. Press the OK key and memorize the set value.
1. Receive the NTSC 3.58MHz broadcast.
2. Make similar fine adjustment of NTSC 3.58 COLOUR in the
same manner as for above.
1. When NTSC 3.58 is set, NTSC 4.43 will be automatically set at
the respective values.
Advertisement
Table of Contents
