Table of Contents
Advertisement
Beverage Chiller™
36" Models only
The Beverage Chiller™
keeps beverages and other
items cooler than the rest of the
fresh food section. A cold air
inlet allows air from the freezer
section to pass into the beverage
chiller. The Beverage Chiller™
control is located on the left wall of
the fresh food compartment. The
control adjusts the amount of cold
air allowed into the beverage chiller.
For a cooler temperature in the
Beverage Chiller™ slide the control
down.
To Remove:
•
First remove the
pick off shelf to the
left of the Beverage
Chiller™.
•
Firmly hold each
side of beverage
chiller, lift up and
away from door
liner.
To Install:
•
Reverse
above
procedure.
Note
•Cold air diverted into the Beverage Chiller™ can
decrease the main refrigerator temperature
Refrigerator control may need to be adjusted.
Crisper Drawers
The Crisper Drawers provide a higher humidity
environment for fresh fruit and vegetable storage.
Controls
The Crisper Controls regulate the amount of
humidity in the crisper drawer.
Slide the control toward the low setting for pro-
duce with outer skins. Slide the control toward the
high setting for leafy produce.
To Remove:
•
Pull drawer out to full extension Tilt up front of
drawer and pull straight out.
To Install:
•
Insert drawer into frame rails and push back into
place.
Note
• For best results, keep the crisper drawers
tightly closed.
19
Use & Care Guide
Hide quick links:
Advertisement
Table of Contents
