1
Set SW5 of DS02 switch on the wired remote controller
PCB to 'OFF'.
Press the
button and
2
wired remote control simultaneously for more than
5 seconds.
3
Wired remote controller LCD displays as shown in
the picture and changes to the 'Indoor unit group
ADDRESS setting mode'.
All manuals and user guides at all-guides.com
button in front of the
Wired remote controller PCB
SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
DS01
DS02
Set the indoor unit PCB
Wired remote controller LCD
Group ADDRESS
(RMC) display
Indoor unit Main ADDRESS display
E-
29