Additional Function Of The Wired Remote Controller; Assigning The Indoor Unit Rmc With The Wired Remote Controller - Samsung MWR-TH00 Installation Manual

Additional Function of the Wired Remote Controller

28
E-
All manuals and user guides at all-guides.com
When using automatic ADDRESS of DVM PLUS, assign
MAIN ADDRESS to the indoor and outdoor unit.
The RMC is not assigned to the indoor unit. If you want to
control the air conditioner with the centralized controller,
you should operate the RMC switch of the indoor unit manually.
You can also assign the RMC using wired remote controller
without operating manually. (Only in COM2 available)
Assigning the indoor unit RMC with
the Wired Remote Controller
You can use this function to control the indoor unit in
the centralized controller.
It means that you assign the RMC with the wired remote
controller without operating the RMC switch manually.
S/W NO. Switch OFF
Assign the the indoor
unit RMC with the
SW5
wired remote controller
Switch ON
Cancel the indoor unit
RMC assigned with the
wired remote controller